Geometry

chris4200GT

New Member
Messages
64
Would anyone know the set up (camber castor etc) for a 2002 Cambio Corsa, mine feels a mile out, but don't know how to check
Cheers
 

lozcb

Member
Messages
12,586
Would anyone know the set up (camber castor etc) for a 2002 Cambio Corsa, mine feels a mile out, but don't know how to check
Cheers


I would only use someone who has a hunter machine , and the specs can be obtained from hunter via the machine , they will probably need notice tho as they may not have the necessary shims needed for any adjustments


regards loz
 

hodroyd

Member
Messages
14,150
Do you have uneven tyre wear, or is it just the feel of the car? Check all the tyres right across the tread for depth of tread, this should show you if there is an actual issue, or not.
 

chris4200GT

New Member
Messages
64
The car just looks to sit high on the back end, and appears slightly higher on the near side ?
I'm concerned someone has had a play with the suspension before me ! and wanted it checking
 

Rex B

Member
Messages
657
CHris

I would contact Shiltech or Graypauls of Nottingham for a price, both should have the shims required to carry out the adjsutments and Graypauls and should have the equipment to check the geometry as well.

Rex B
Manual 3200
 

hodroyd

Member
Messages
14,150
Chris, that description does not sound like geometry, it sounds more like uneven springs. Check the springs to see if they all appear to match, if some look different, or new, that could be your answer. Also check if each spring is seated correctly and has not jumped out of it's retaining seat. If the car is not level it is more than likely springs causing the issue. Castor / camber will only alter the wheel position on the car, not lift the body up, or down.
Cheers
R