EASYMAS Diagnostic - Beta

tan55555 · Jun 1, 2019

Steve4200 said:
It is something we will look at , but no promises at this stage.

Regards
Steve

This would be a really useful feature, the passenger airbag deactivation switch is a weak point of these cars now they are getting older.

CatmanV2 · Jun 2, 2019

tan55555 said:
This would be a really useful feature, the passenger airbag deactivation switch is a weak point of these cars now they are getting older.

That one turns itself off, though.

C

tan55555 · Jun 5, 2019

CatmanV2 said:
That one turns itself off, though.

C

Maybe I didn't leave mine long enough to reset. Once it had come on I had to get a dealer to reset it (was driving past and popped in, they kindly reset it for me). That was >12m ago and not come back on since thankfully.

CatmanV2 · Jun 5, 2019

tan55555 said:
Maybe I didn't leave mine long enough to reset. Once it had come on I had to get a dealer to reset it (was driving past and popped in, they kindly reset it for me). That was >12m ago and not come back on since thankfully.

Interesting. Unless the switch fails totally it'll reset each time you restart.

C

tan55555 · Jun 5, 2019

So if it came on again, fitting a new switch should then mean it resets hopefully. That is good to know, the switch cast about £30 I seem to remember when I looked it up. Thanks for the info.

Steve4200 · Jun 8, 2019

Engine OBDII !

Wanderer · Jun 8, 2019

How close are we to release, if you need more input, I'll willingly plug it into my QP5 24/7!!

Steve4200 · Jun 8, 2019

Wanderer said:
How close are we to release, if you need more input, I'll willingly plug it into my QP5 24/7!!

Initial release in the coming months.

Thanks for your offer , we may get back to you for separate testing on a QP. The reason being QP support will be slightly less than others as Maserati decided to do some unique communication architecture on the QP.

Regards Steve

Ngknick · Jun 18, 2019

Hi, little late to the party but I have an '02 manual GT spyder available for testing if needed in USA. Thanks!

Sent from my Pixel 2 using Tapatalk

Steve4200 · Jun 21, 2019

Ngknick said:
Hi, little late to the party but I have an '02 manual GT spyder available for testing if needed in USA. Thanks!

Sent from my Pixel 2 using Tapatalk

Thanks for the offer but we have a Beta Tester with an Auto -which seems to be the most needed diagnostic.

Thanks again.

Steve4200 · Jun 21, 2019

The first release of EasyMAS will be without write functions.

To help us look into this what is needed ??

Detail is needed :- The function required , the info required , why and any difference between vehicles / MY

spn · Jun 22, 2019

I'd have thought setting the PIS point and resetting the clutch wear index would be the most useful write functions.

Steve4200 · Jun 22, 2019

spn said:
I'd have thought setting the PIS point and resetting the clutch wear index would be the most useful write functions.

Yes , but detail needed on this process for all models ?

spn · Jun 23, 2019

Steve4200 said:
Yes , but detail needed on this process for all models ?

Ah, no idea of the protocol implementation.

Steve4200 · Jul 2, 2019

Addition to F1 software - this took some doing.

Navcorr · Dec 11, 2019

Steve4200 said:
..... we will sell the system at a 3 month introductory offer to forum members at £395, free updates, free worldwide shipping and 3 year warranty on the hardware. Our Web store price will be £495 from the date of release.

Hi Steve, do you have any update on availability and likely cost?

Steve4200 · Dec 11, 2019

Hi ,

We are just finalising the first setup to sell.

There will be options :-

1.
Read only hardware and software for F1 gearbox , Skyhook , Steering , Engine OBDII.
These are done and ready to go. Free updates will be worked on and hoping to add Engine Enhanced , Airbag , Instrument Cluster and ABS. Ideal for any owner / buyer to diagnose these normally mystical systems.
This cost will be around £400 to £650 depending on USB , Bluetooth and bundle with Windows Tablet. This will be intro price for 1-3 months then rising to around £450 to £750.
When this goes on sell we will list compatible years and models - expecting most M138 , M139 and M145's.
Release expected late Jan / Feb 2020.

2.
Read , Write version with sort after functions. This will be costed higher with possible extra charge / subscription for upgrades as for use by repair shops due to the requirement for procedures to be carried as per manufacturers service documentation for safety and prevention of damage to vehicle systems if used incorrectly.
Release date / cost TBA - update in 2020.

Take some time to look back over previous posts for example software screenshots.

Will update as we go.

Regards
Steve

Navcorr · Dec 11, 2019

Steve4200 said:
We are just finalising the first setup to sell....
… Take some time to look back over previous posts for example software screenshots.

Thanks for updating - I'm sure there will be many who have followed the thread from the start and your progress.
The thread had gone quiet though and I was wondering what stage you had reached.
Hats off to you for your abilities and for the undoubted effort and patience getting so far.

Steve4200 · Dec 15, 2019

Navcorr said:
Thanks for updating - I'm sure there will be many who have followed the thread from the start and your progress.
The thread had gone quiet though and I was wondering what stage you had reached.
Hats off to you for your abilities and for the undoubted effort and patience getting so far.

Thanks for your comments , it's not been an easy task but we are now confident that an affordable solution can be offered to aftermarket owners.

Regards Steve
EasyObdtools

Wanderer · Dec 15, 2019

Steve4200 said:
Hi ,

We are just finalising the first setup to sell.

There will be options :-

1.
Read only hardware and software for F1 gearbox , Skyhook , Steering , Engine OBDII.
These are done and ready to go. Free updates will be worked on and hoping to add Engine Enhanced , Airbag , Instrument Cluster and ABS. Ideal for any owner / buyer to diagnose these normally mystical systems.
This cost will be around £400 to £650 depending on USB , Bluetooth and bundle with Windows Tablet. This will be intro price for 1-3 months then rising to around £450 to £750.
When this goes on sell we will list compatible years and models - expecting most M138 , M139 and M145's.
Release expected late Jan / Feb 2020.

2.
Read , Write version with sort after functions. This will be costed higher with possible extra charge / subscription for upgrades as for use by repair shops due to the requirement for procedures to be carried as per manufacturers service documentation for safety and prevention of damage to vehicle systems if used incorrectly.
Release date / cost TBA - update in 2020.

Take some time to look back over previous posts for example software screenshots.

Will update as we go.

Regards
Steve

Couple of questions....

1. Will the 1. version allow resetting of oil change spanner?

2. I take it then that us ordinaries will not be able to do our own clutches etc?

EASYMAS Diagnostic - Beta

Member

Member

Member

Member

Member

Member

Member

Member

New Member

Member

Member

Junior Member

Member

Junior Member

Member

Member

Member

Member

Member

Member