CNC Components

Bebs

Member
Messages
3,269
I’m happy with the OEM 2 alu pedals and now your 3rd alu dead pedal stindig. Could you remove me from the 3 pedal wish list please. Cheers
 

Devonboy

Member
Messages
1,289
Nope - Got the dead pedal but...

1 would like to understand how I get the MC in the pedal red

2 would like to understand how the accelerator pedal is fitted as it looks like a complete unit from which the pedal isn’t meant to be detached
 

stindig

Member
Messages
446
Nope - Got the dead pedal but...

1 would like to understand how I get the MC in the pedal red

2 would like to understand how the accelerator pedal is fitted as it looks like a complete unit from which the pedal isn’t meant to be detached
1. I’m going to experiment with red lacquer - I’m semi-confident I can crack it. If not, I’ll laser-cut some red vinyl and clear lacquer over the top

2. There are two Allen key bolts behind the accelerator pedal at the top. I’m guessing that if these are removed, the rest is stuck on so could be prised off. Will experiment on my car and report back
 

Gazcw

Member
Messages
7,696
Nope - Got the dead pedal but...

1 would like to understand how I get the MC in the pedal red

2 would like to understand how the accelerator pedal is fitted as it looks like a complete unit from which the pedal isn’t meant to be detached
It is clamped at the top and stuck on as far as I know from one I have seen before. I would remove my rubber cover and then stick and a couple of bolts at the top as simpler than messing about making a bracket. I guess the fixing of the brake cover is much more important with the 3 or 4 bolts through the pedal. I would be happy with a plain pedal tbh. I don't have an mc!
If they came with mc I would prefer plain and not red.
I will take whatever comes though as I need ally pedals under the trotters.
 

Devonboy

Member
Messages
1,289
1. I’m going to experiment with red lacquer - I’m semi-confident I can crack it. If not, I’ll laser-cut some red vinyl and clear lacquer over the top

2. There are two Allen key bolts behind the accelerator pedal at the top. I’m guessing that if these are removed, the rest is stuck on so could be prised off. Will experiment on my car and report back
If you crack these points - I am in!
 

sionie1

Member
Messages
1,310
I have a blank accelerator that I can send to you for measurements and fit etc. It doesn’t have any metal on it, it’s the bare plastic pedal fitting..
 

stindig

Member
Messages
446
Does anyone have a pair of the large flappy paddles, that I could use for reverse engineering the aluminium ones, before I try and remove mine? I would only need them for a week and they would be treated gently.