Biturbox - Biturbo family fuse box replacement

Maurizio

Junior Member
Messages
55
Hello everyone.
After much work (four years in the making) I'm now able to lift the veil on the Biturbox project. I spoke briefly about this in the thread about 3D printing, in the same Biturbo section of this forum.
Development stages have been covered fully in the Repartocorse2 Italian Maserati forum.
It is a complete, plug and play state of the art replacement for the inner printed circuit board of the dreaded fuse box, and works very well.

This is what it looks like. It fits inside the original box and comes with a proper fuse cover to match the original box, too.
I haven't spoken outside the Italian forum so far as we have several orders from Italy to serve first, and also, I wanted to test the box thoroughly on some friends' cars, as well as on mine.

87943

If you want to know more, feel free to download and read the manual here:
 

silverbiturbo99

New Member
Messages
2
Was just writing to say that I’ve installed the biturbox that they sent me and what a difference!!!!!

Some advantages of the new circuit board:
-Windows are indeed going up and down faster
-I had a gremlin with my external lighting relay that would require me to reseat the relay periodically . This was very dangerous while driving. This is no longer happening
-With my old fuse box my interior ac did not work, now it does!!! What a quality of life improvement
-Reliability. I had no idea how terrible and janky the old folded circuit board was. Mine was delaminating and shorting left and right. It is quite satisfying having it replaced with the modem pcb that is less failure prone.
-Uses modern more readily available fuses.
-Install was easy with the clear instructions provided. The job took me about 3hrs to complete and the most difficult part was removing the engine bay relay holders to get access to the fuse box.
the disadvantages of the board:
-price- I paid ~$800 dollars for it but it is reflected in the quality of the product and customer handling.

As you can see the advantages heavily out weigh the cons. I see this as a must have upgrade for all biturbos. If you don’t believe me take a look at your board and notice how dated it is (I had no idea they folded circuit boards back then).