Aluminium dead pedal- using one as a template for more

Wagons-Lits

Member
Messages
250
The pedal is with the firm now. I’ve got them to do drawings etc and just want to make sure the quality is there. As soon as I hear back/see the 1st one I’ll drop out a message.
great news, thank you in advance for all your efforts on this.
 

sionie1

Member
Messages
1,310
So it appears that another forum member, Stindig, is also working on this, as well as the cnc seat levers. He’s awaiting a price from his contact, so in the interests of price etc I’ll hang fire until his contact comes through next week.
 

Gazcw

Member
Messages
7,700
So it appears that another forum member, Stindig, is also working on this, as well as the cnc seat levers. He’s awaiting a price from his contact, so in the interests of price etc I’ll hang fire until his contact comes through next week.
A full set for the qp auto would be good. ;)
 

stindig

Member
Messages
446
Hi all. £42 including postage. It's based on this pedal so brushed top surface & anodised. I haven't sourced the 3 bolts but I'll see if I can include them. Does anyone know if all Granturismos have the embedded threads ready to accept the bolts?
 

Attachments

  • IMG_6242.jpg
    IMG_6242.jpg
    2.9 MB · Views: 18

Doctor Houx

Member
Messages
791
Count me in for one 100% please. Don’t think the threads are there, but drilling a hole for self tapping bolt threads would work. Just need to be careful about any wiring under the plastic housing this will bolt onto.
 

StuartW

Member
Messages
9,306
I changed my pedal set for the MCs with this same dead pedal and just screwing them into the carpet itself plus some 3M tape for extra security is just fine. The carpet is a good taught fit so there shouldn't be any need to use longer screws and go into the floor beyond.

Well done on getting this done for a good price too
 
Last edited:

sionie1

Member
Messages
1,310
Hi all. £42 including postage. It's based on this pedal so brushed top surface & anodised. I haven't sourced the 3 bolts but I'll see if I can include them. Does anyone know if all Granturismos have the embedded threads ready to accept the bolts?
Is it a copy of the pedal, or close approximation. The chap I was using has tried to charge extra now for the slanted cuts, so it was going to be significantly more expensive for an exact copy.
 

stindig

Member
Messages
446
I'll start accumulating names and will order on the supplier once we reach a requirement for 10 units. So far I have:

Bebs
Wagon-Lits
Doctor Houx
jamesc69
Lavazza?
Singhaa88?
ChrissGT?
 

Doctor Houx

Member
Messages
791
Come on GT/GC owners! We've got 6 orders here I think so far and need 10 so Sionie can order. This is as per factory spec but miles cheaper at £42 inc P&P.
 

Ewan

Member
Messages
6,757
Here’s a picture of the peddles fitted to my Strad as standard. So if I went for this dead peddle, I’d have three different patterns. :mad:
65296
65296