Alternative parts, what everyone needs to know...

Wally

Junior Member
Messages
133
Solenoid looks a lot like Alfa part 60508126 from Alfa 164, and the complete part looks like Lancia kappa part 46309416 and 82484269.
 

PrathShankar

New Member
Messages
13
Thanks All Greg @ PPCP was able to source at v reasonable price for a replacement. Thanks again for sharing the knowledge! P
 

Kyle4200

Junior Member
Messages
245
Cambiocorsa Power Unit - Solenoid Vales, Shared with the Alfa/Fiat Selespeed System.

The Alfa Part (QPV CK 0002962.C) £296.99
71737622-371-1-800.jpg

The Maserati Part (QPV CK 0002962.C) #980001154 £486.00
s-l1600 (1).jpg
 

CatmanV2

Member
Messages
30,087
I was wondering the same. Just about to get a GT and need some bits and bobs. If someone could post an up to date sheet, it'd be much appreciated.

Cheers
Mike
I don't think there's been much addition since the one that Phil put together, but if he's not updating it, that needs to be added

C
 
Messages
567
Okey doke. May help out with that, if any helps needed. Not IT savy, but good at finding stuff and people ;)
Will know how I'm fixed time-wise, in a few weeks.
 

Roger

Junior Member
Messages
456
Hi all, is this still relevant?

SportsMaserti.com proud to announce Belfast Brake discount offer...
I am please to announce that Belfast Brakes and SportsMaserati.com have negotiated a high performance Ferodo/Brembo(Fedral Mogul) deal to our members.

They are a far superior compound than the OEM fit with higher heat dispersal capability to eliminate brake fade, and ultra low dust so ideal for your OEM drilled discs.

The price, inclusive of postage and VAT is £35 per front or rear set. The beauty of Belfast Brakes, is that you can order over the phone by credit card or paypal.

Please do not confuse these with EBC Green Stuff, because that they are not.



An ultra low dust high friction, high temperature compound with a heat transfer layer next to the backing plate to transfer heat away from the disc and pad enabling operating temperatures of slightly over 520deg with no fade at all. Green Gripper low dust pads complement the drilled disc range perfectly.

Please PM me for the promotional code.

Dogleg
Cheers Roger
 

GeoffCapes

Centenary Club
Messages
9,556
On my 4200 I upgraded to EBC Yellow Stuff pads and they made a massive improvement over the OEM ones as soon as they were put on.
Wouldn't hesitate to recommend them.

If/when the pads need changing on my GTS I'll be putting Yellow Stuff on them straight away.
 

Roger

Junior Member
Messages
456
On my 4200 I upgraded to EBC Yellow Stuff pads and they made a massive improvement over the OEM ones as soon as they were put on.
Wouldn't hesitate to recommend them.

If/when the pads need changing on my GTS I'll be putting Yellow Stuff on them straight away.
Ok, thanks.

I have been looking at these.

Cheers

Roger
 

CatmanV2

Member
Messages
30,087
On my 4200 I upgraded to EBC Yellow Stuff pads and they made a massive improvement over the OEM ones as soon as they were put on.
Wouldn't hesitate to recommend them.

If/when the pads need changing on my GTS I'll be putting Yellow Stuff on them straight away.
I used them on my 4200 as well. Very good.

C
 

Trev Latter

Centenary Club
Messages
1,118
Yellow stuff on mine too. Vast improvement on the Ferodos in there before, but I don't know which compound as I didn't fit them, but I suspect standard road pads.