3200gt rear control arm bushing replacement?

[timkee330ci]

Hi all,
My 3200GT is going to mot, i found that the rear upper and lower control arm bushings are worn.
http://postimg.org/image/ukbbo6fiv/
http://postimg.org/image/nb4ji3iev/

Are these rubber bushing replaceable? Or must this be purchased as a whole with the control arm?

The power steering rack end on the right is also worn, it's also the same kind of rubber bushing. So same question, is it replaceable? I guess this part can be bought separately because it's threaded into the main steering rack. However I cant find any supplier on line. Any idea please??
http://postimg.org/image/mpxt6hzzt/


Following is the link of an upgrade to tie rod of the rear control arms, please take a look, it's somehow a linked issue.
http://www.maseratiforum.co.uk/3200/4200_rear_Lower_suspension-arm_play/m_30192/tm.htm

 

[richard_masa_4200]

The rear arm issue you have are not bushes, they are ball joints and your's seem pretty rooted. There must be a huge amount of play in them. Short answer is you have to replace the whole arm. You can't refurb the ball joints.

 

[timkee330ci]

Hi all,
After some research, i found the replacement kit of track rod end from eurospares.
The part number is 980001706
link:
http://www.eurospares.co.uk/searchResult_one.asp?S=980001706&TM=3&TMo=380&TA=1&TB=20157

Can anyone verify have i found the correct part? I am looking for replacement of the part that connect the steering rack to the front wheel.
Thanks!

 

[davy83]

Eurospares will confirm the part is right, just ask!