3200 gt ferrari suspension actuators

lee

New Member
Messages
53
a7b68673a5ee68a39b8f3f2803e554e4.jpg
84b30eacd9ed870f5c13950a6247041a.jpg

OK so my error light came on suspension proplem no way to read codes so unplug all the actuators and remove x4 plug 1 in at a time on the drivers side front so it can be seen turn ignition on and you will sew the inside move left then right then back to centre! Do this to all 4 till you find One that dont. Then cut the top off of it and you probably have a wire that's come off resolder it on and seal up andd test sorted in pictures you can see the brown wire has come away from the pin

Sent from my D6603 using Tapatalk
 

allandwf

Member
Messages
10,958
Thanks for the pics, should make life easier for anyone wanting to cut the top off theirs. Knowing where to cut is always a bonus.
 

lee

New Member
Messages
53
I used a screwdriver a flat and tapped with rubber hammer all the way around I got it of in 3bits so was fine to glue it together again then bit of sealer on joints works a treat no lights on happy days

Sent from my D6603 using Tapatalk
 

Tim A.

New Member
Messages
4
yes that's the one! thanks. Is it possible to demount the acuators without demounting the shocks? You have to have "small hands" for it.
 

conaero

Forum Owner
Messages
34,593
Rebuild service at a fraction of the cost, used him, excellent: