3200 Fog Light/Indicator unit fitting.

[skyestuart]

Hi Guys

About to fit my replacement foglight/indicator unit which I got from David Askew Any tips on best way to fit it? I'm guessing I'll have to take the wheel off?

Its too hot to do this today (even on Skye) so wait for cooler weather tomorrow.

Cheers

Stuart

 

[SteveM]

From memory you have to remove wheel and then wheel arch liner to remove the rear nut from bracket and electrical connector and then remove the front underskirt/bib tray and then use a very long 1/4"extension bar from below between chassis rail and intercooler? to get onto inner nut. I have a photo at home that I will try to find later but I find this the easier way to remove headlight bottom nut rather than through grille.

 

[skyestuart]

Thanks Steve ... removing that undertray is a pain ... thats what I was worrying about !

 

[SteveM]

Hi Stuart - these are the two images I was trying to describe earlier - good luck

 

[skyestuart]

so annoyed with myself.... I cracked the glass lens on fitting it ... dropped it on the driveway .... aaaaarrgh

 

[Vampyrebat]

DOH!!!...................SupranoStu has a few of them, give him a call 07860 446039..............Butter Fingers!!