RSM Masser
Member
- Messages
- 2,437
I’ve managed to source the parts not from euroscares but another 3200 group. The extension housing gasket is no longer available but at £3 for a sheet of paper on flea bay that is the least of my worries
Remove the prop from the diff end and the big rubber washer thing - if you have solid straight through exhausts like mine it’s a bit of a faff to get the housing out, support the gearbox on blocks to remove the tear support
The filler cap is clearly visible with the extension housing removed - I shall be filling it up before replacement.
Bearing and seal drove out easily with a large socket and replacement was just as quick and easy
New seal sits proud slightly - the old one was flush leaving me to believe it was a pattern part
The lock nut was only finger tight so this was probably also part of the problem
All done so far with the car on stands and me lying underneath oh for the joy of a ramp or 4post lift
Remove the prop from the diff end and the big rubber washer thing - if you have solid straight through exhausts like mine it’s a bit of a faff to get the housing out, support the gearbox on blocks to remove the tear support
The filler cap is clearly visible with the extension housing removed - I shall be filling it up before replacement.
Bearing and seal drove out easily with a large socket and replacement was just as quick and easy
New seal sits proud slightly - the old one was flush leaving me to believe it was a pattern part
The lock nut was only finger tight so this was probably also part of the problem
All done so far with the car on stands and me lying underneath oh for the joy of a ramp or 4post lift