2.5'' High flow Sport cats 200 cell

kawasaki

Junior Member
Messages
66
Hi I'm planning on upgrading the cats on the GTS 4.7 with a custom build. I noticed the high flow cats being sold dont have the 2 O2 bungs built into them. Do any of you guys have pictures of what it should look like installed. Thanks 56828
 

FIFTY

Member
Messages
3,100
Try looking at the 5" diameter euro 5 cats at jetex

Or you could buy the mantle and cones separately, drill out the hole for the lambda boss in the cone weld the boss in then weld the cones onto the mantle... This way you can make sure the cone and boss are made from stainless steel. If I had to do it again I would probably do this.

Generally the pre fabricated cats use mild steel
 

kawasaki

Junior Member
Messages
66
That's a very good idea. I'm looking into 5'' mantle and cones here in Canada. I'll keep the post updated with the progress..Thanks FIFTY
 

Razz

Junior Member
Messages
123
Hi I'm planning on upgrading the cats on the GTS 4.7 with a custom build. I noticed the high flow cats being sold dont have the 2 O2 bungs built into them. Do any of you guys have pictures of what it should look like installed. Thanks View attachment 56828
I would like to have your CATS if you decide to depart with them.
 

kawasaki

Junior Member
Messages
66
Just an update on the installation of the cats. Removed the old Exhaust system and prepping the tubing for fitment.
 

Attachments

  • 66849660_471351660360751_8518347958305947648_n.jpg
    66849660_471351660360751_8518347958305947648_n.jpg
    200.3 KB · Views: 20
  • 66856345_387565601944555_5733509318406307840_n.jpg
    66856345_387565601944555_5733509318406307840_n.jpg
    306.1 KB · Views: 21
  • 66079373_443631242857554_7906478048210321408_n.jpg
    66079373_443631242857554_7906478048210321408_n.jpg
    89.7 KB · Views: 20
  • 66793228_2344663492286318_8220661971133923328_n.jpg
    66793228_2344663492286318_8220661971133923328_n.jpg
    251 KB · Views: 19
  • 66827497_752848565134515_6056817164910854144_n.jpg
    66827497_752848565134515_6056817164910854144_n.jpg
    275 KB · Views: 18
  • 67071492_679825015812372_1780314075050278912_n.jpg
    67071492_679825015812372_1780314075050278912_n.jpg
    165.7 KB · Views: 18
  • 67168267_349874385904328_8265748884244922368_n.jpg
    67168267_349874385904328_8265748884244922368_n.jpg
    209.8 KB · Views: 20

kawasaki

Junior Member
Messages
66
Finally finished the installation today. Here are some pictures of the install.
 

Attachments

  • 67183882_2277146605736671_2053662900622458880_n.jpg
    67183882_2277146605736671_2053662900622458880_n.jpg
    253.2 KB · Views: 10
  • 67049382_332858304317911_4559550617307054080_n.jpg
    67049382_332858304317911_4559550617307054080_n.jpg
    189.7 KB · Views: 11
  • 67095812_384648302256230_2038568886600728576_n.jpg
    67095812_384648302256230_2038568886600728576_n.jpg
    364.5 KB · Views: 10
  • 67197022_696166067478442_8686014066973474816_n.jpg
    67197022_696166067478442_8686014066973474816_n.jpg
    205.7 KB · Views: 12
  • 67403749_2668574116510808_3064234362812760064_n.jpg
    67403749_2668574116510808_3064234362812760064_n.jpg
    153.1 KB · Views: 12
  • 67212075_2313233228760912_4011525851333001216_n.jpg
    67212075_2313233228760912_4011525851333001216_n.jpg
    114 KB · Views: 11
  • 67295356_499468524130814_6831034794390847488_n.jpg
    67295356_499468524130814_6831034794390847488_n.jpg
    97.8 KB · Views: 12
  • 67465352_338953843660385_6618118069933834240_n.jpg
    67465352_338953843660385_6618118069933834240_n.jpg
    152.1 KB · Views: 5
  • 67131599_469190497214326_6745499524258594816_n.jpg
    67131599_469190497214326_6745499524258594816_n.jpg
    179.1 KB · Views: 3