Thanks for your reply TimR.
I have no problem with the way they look, and if they reduce shudder that's surely a good thing?
However I still have a pair of unused brand new Maserati blades in stock, so based on your comments I'll use those up first.
Thanks again,
Tony
Thank you very much Frog3200, that's very helpful. I've just measured the existing blades , and they are BOTH 550 long, as against 550 and 530 for the pair with the reference AR550S. Searching on Amazon France I found that reference AR550U corresponds to ONE blade 550 long. The current price...
Has anybody fitted BOSCH AEROTWIN WINDSCREEN WIPERS to their 4200 please?
And if so, what reference number(s)?
I have them on my Alfa 156 and they work a lot better than the originals.
Many thanks
Tony
New question...
Although not too bad, I have decided to redo the the sticky buttons on the radio unit. Andy has sent me all the relevant stickers (thank you Andy) and I have just received further supplies of the matt varnish and the Isopropanol. Before I take eveything apart and remove all...
Latest update : all back together AND WORKING!
After many many hours I have finally completed the redoing of the five buttons that looked identical but were not.
To do this I had to start by removing the multiple layers (6 or 7) of matt varnish, the two layers of satin black and the one layer...
UPDATE
The relay ordered on Amazon yesterday arrived today. I fitted it and it works perfectly (i.e. the engine starts AND STOPS).
For information, the original relay (that failed by sticking closed) was a "BITRON B047E 12V 30A 46520412" - Bitron is Italian.
I replaced it with a "Bosch 0 332...
Many thanks Andy.
I originally bought two sets of stickers and although I ruined one of them it was not one of these five. So I should be OK unless I ruin another one.
Cheers
Tony
Update : cause of my problem found, but it means I have to start all over again with my 5 buttons.
I got to the bottom of why when I clipped on the panel it was pushing down on the buttons making most of them the equivalent of being pushed all the time.
I had, wrongly alas, thought that all 5...
Thank you Zep. As the cable from the ignition switch dissappears forwards and unclipping it looked particulary awkward to do, I thought I'd try to find the appropriate relay first, just in case that would cure the not-turning-off problem.
I identified relay "D" under the dashboard as being a...
Hello again Zep. I've been trying to locate the start enable and ignition relays by looking in my owners manual (handbook), but can find nothing that seems to match.
Please could you enlighten me on the start enable and ignition relays - in particular where are they to be found? And how to...
Thanks Zep. Yes radio stays on when I turn the key to the off position. Please could you enlighten me on the start enable and ignition relays - in particular where are they to be found? And how to check whether they are sticking, please?