Recent content by Raulpereg

  1. Raulpereg

    OVERHEAT AND OIL PRESSURE

    I checked fuses and relays of both speeds and they are ok, so thats not the issue. Tomorrow I will continue investigating
  2. Raulpereg

    OVERHEAT AND OIL PRESSURE

    Thanks! I have seen in the instructions that there are 2 relays for electronic cooling fan, called first and second speed. Which one do say to remove? First speed and then is stuck in the second? I wil check if both are ok
  3. Raulpereg

    OVERHEAT AND OIL PRESSURE

    I left the engine off about 15 minutes and it returned to normal....
  4. Raulpereg

    OVERHEAT AND OIL PRESSURE

    Hi. Last weekend, at 32°C I decided to do some mountain roads with the GS. I was using during some time 2nd and 3rd gears pushing over 6K rpm. In same road but not so hot outside I saw the temperature go well over 90° (about 115 if I remember correctly), but this time I had the overheat light on...
  5. Raulpereg

    Refurbishing Steering Wheel Cowl (4200) Sticky Finish

    No, but I would be also interested as I have refurbished the plastic cover but dont know how to dismount the lockers, and I think they go together with the handles. Im afraid dismounting door panel will be needed...
  6. Raulpereg

    Refurbishing Steering Wheel Cowl (4200) Sticky Finish

    I uninstalled finally 2 days ago. Mine are alen. Thanks anyway!:)
  7. Raulpereg

    vibration at speed

    It is engine speed, happening around 4000 rpm, but it is more evident in 6th at speed. According to the dealer it is normal that vibrations are higher in an overdrive gear. Also in the other gears Im not usually keeping this rev range, just passing through. And in 6th passing this range and...
  8. Raulpereg

    vibration at speed

    Tyres and disks are new in mine, so that shoul not be the issue. I have paid more attention and it seems is vibrating in a range of rpm, about 4000, but you feel it more in 6th at speed than in others. In the dealer they told me this is normal. So everything looks like the issue is the same...
  9. Raulpereg

    vibration at speed

    After checking with dealer it seems to fix this is far more complex in the GS than 3200. In the 3200 the axe is not covered so easy to access. In the GS is inside a cover and you need to remove from motor or transmission side to access, so this is to be repaired when changing clutch....
  10. Raulpereg

    STICKY SWITCHES DONE IN AN HOUR

    Images less than 5Mb is too big? I cannot attach it
  11. Raulpereg

    STICKY SWITCHES DONE IN AN HOUR

    Ok. I managed to dismount all plastics, just missing wheel cowl and the door lock switches (image attached). Wheel cowl I have asked to Vampyrebat about screw type in the chat he created. Does anyone know how to remove the door switches? If not I will try to repair on site.
  12. Raulpereg

    Refurbishing Steering Wheel Cowl (4200) Sticky Finish

    Hi! The bolts below are all alen? Do you know size number? Im strugling to remove them...
  13. Raulpereg

    STICKY SWITCHES DONE IN AN HOUR

    Anyone knows how to dismantle the central console buttons in a GS? I mean these of auto, fog lights...After removing the 4 screws how do you continue?
  14. Raulpereg

    STICKY SWITCHES DONE IN AN HOUR

    Good result! Hey, sorry about my english but what is white spirit/turps? Google translator doesnt provide anything I recognize, is it like alcohol?