Recent content by corradokid

It I’ll be fine regarding emissions, it’s post cat. It will be borderline antisocial though IMHO. I took mine off and refitted the original as I didn’t want to annoy the neighbours, and to be honest I didn’t think it matched the ethos of the car either really…

Copper and ink is closed now I believe, as I understand it opening a restaurant somewhere on the coast.

Ah ok fair enough

Is the motor on the flexible drive not for the height adjustment? The middle motor looks like the fore/aft adjustment to me.

Can you share the specs and price please

Sounds feasible.

The ballast is just the driver for the dipped/main beam. It won’t have anything to do with any drl or indicators

Any price?

They have little arms which locate within the actuator rod.

hopefully that will be it. I have a potentiometer assembly ready to go on mine just need to find time to drop the gearbox.

Not part of the clutch no. The sensors are fitted to the actuator assembly which in turn is bolted to the gearbox.

have av confirmed the fix? I’ve had the same issue, from looking at scantool data the reason behind the fault is the sensors reading below the threshold when cold (readings ok once warmed up) hence it won’t select reverse. The park off warning appears to be a side effect of the gearbox control...

We’re you getting a park off warning out of interest?

Interesting. Are we talking about the same thing here? You can do clutch adaptions, gearbox self learns etc with yours?

You don’t need an sd3 for that. An autel ap200 (£60 next day from Amazon) will do everything you need short of any writes to vehicle. Failing that as safrane said, either listen with pdc engaged or wet your finger and rub across the sensors, you will feel any active. But cheap scan tool will...