Recent content by 6Speed

The filter in my secondary air pump dissolved from old age and was partially sucked into the system. It is not necessary to remove the pump to remove the cover. Just pry it off with a flat blade screwdriver next to the top two retaining snaps. A lawn mower air filter with the precut hole...

Yes, the skinny right arm has to fit between fan pack and engine when reaching across from the passenger's side under the air flow meter to the pulleys on the driver's side. Hope the fan pack removal was not too hard!

Just replaced mine in 45 min without pulling off any parts or loosening any fasteners. Use a 15mm 6 point on a 3/8 ratchet on the tensioner. Slide a breaker bar on the ratchet handle to reduce effort. Pull the belt off the top idler, remove the ratchet and then pull the belt off of the crank...