Blasted key!

CatmanV2

Member
Messages
48,546
Take a look on Ali.express type in their search box Maserati key fob they supply plenty of Maserati key fobs cases and blades its a china supplier and their prices are very cheap.

and many of them don't actually match inside....

C
 

MaserAndy

Junior Member
Messages
76
I had the same problem the internal layout wasn't the same and stopped the blade from moving properly if I remember right. But I did manage to find another which worked fine. If you go down the cheap Chinese route just have a good look at the picture of the internals and compare with your original.
 

Han QP Sport GT

Junior Member
Messages
43
[QUOTE = "Keano, post: 609664, lid: 4917"] Ik heb een positieve ervaring met een sleutel die ik uit China kreeg - https://www.tomtop.com/p-k4227.html en heb ook een leuke truc geleerd van de slotenmaker die ik denk dat we allemaal zullen waarderen. Wanneer we een vervangende sleutel kopen, moeten we de elektronica en de glazen transponder omwisselen, maar het is ook mogelijk om het afgesneden deel van het originele mes te hergebruiken en te voorkomen dat er een sleutel wordt afgesneden. Zie bijgevoegde afbeelding - er is een speld die je eruit springt (vergelijkbaar met een horlogebandje) en dan kun je het originele Maserati-mes in de nieuwe sleutel steken. Er was wat archivering om het voor elkaar te krijgen, maar voor $ 13 voor de sleutel en  £ 5 voor de slotenmaker om het mes te verplaatsen, is de klus geklaard.

Ik betaalde express en kocht er 3.

Keano

View attachment 47042[/CITAAT]

Dank voor de goede tip, heb hetzelfde probleem.
 

CatmanV2

Member
Messages
48,546
Seems too good to be true. So probably is. OTOH for $60.....

Might get one of my guys to send one over

C
 

Mattp

Member
Messages
501
Seems too good to be true. So probably is. OTOH for $60.....

Might get one of my guys to send one over

C

They do a two pack for $80 So if you want to go halves and save a few quid...
They don't have the logo sticker though, which has stopped me in the past- plus the unknown of how accepting and how expensive it would be to get them coded...

Logos are available here... but a bit of a mystery as to the quality of them...

£6.28 | Replacement For Maserati Car emblem insignia 2.4*1.5cm Aluminum DIY sticker For Maserati KEY LOGO
https://s.click.aliexpress.com/e/bO0qQi7P
 

CatmanV2

Member
Messages
48,546
£60-£120 to code them up. Will need a dealer. And you'd need to get the blade moved or cut.

Let me have a think

C
 

Mattp

Member
Messages
501
£60-£120 to code them up. Will need a dealer. And you'd need to get the blade moved or cut.

Let me have a think

C

If the coding was closer to £60, that would be a touch!

The blade being cut shouldn't be a problem... most key cutters should be able to do that, it's the coding that requires the magic.
 

CatmanV2

Member
Messages
48,546
If the coding was closer to £60, that would be a touch!

The blade being cut shouldn't be a problem... most key cutters should be able to do that, it's the coding that requires the magic.

You're not going to get many dealers to do it for less than an hour labour (I'd have thought). And that's assuming it works.... I've heard from some (one?) Indie (can't recall if it was AV or Jason's in Altalanta) won't touch the security systems with anything other than factory / OEM kit. For a start you can't *add* keys. You need to delete *all* of them, then add them all. So it's not at all impossible to end up with a car that won't start....

C
 

Wanderer

Member
Messages
5,791
They do a two pack for $80 So if you want to go halves and save a few quid...
They don't have the logo sticker though, which has stopped me in the past- plus the unknown of how accepting and how expensive it would be to get them coded...

Logos are available here... but a bit of a mystery as to the quality of them...

£6.28 | Replacement For Maserati Car emblem insignia 2.4*1.5cm Aluminum DIY sticker For Maserati KEY LOGO
https://s.click.aliexpress.com/e/bO0qQi7P
Still look wrong, the original keys have a hole in the plastic for the key ring, at least my one original ones does. And no slidey bar thing....