Hi all!
I have been trying to find a power curve for 3200GT(A) without success. Usually stock power/torque curves can be found quite easily but not in this case i suppose...
Does anyone of you guys know where to find one?
Yes there is, very impressive .
Yes there is, very impressive .[/QUO
Yes, yours were very impressive Phil, Mine run out at around 400hp but that was with the old engine.
Dave
Is yours modified Phil?
Stock or delete of pierburg valve mod either way the 3200gt brings on the turbo spool hard around 2-2.5k full boost can be had by 3k with mod done, without pierburg mod it comes in full around 5k so it has max traction for the average Joe
Could you post an how to do it, when your doing the valve mod
Cheers
Dave
Stock or delete of pierburg valve mod either way the 3200gt brings on the turbo spool hard around 2-2.5k full boost can be had by 3k with mod done, without pierburg mod it comes in full around 5k so it has max traction for the average Joe
What kind of mod is mentioned here? my 3200GTA's ex owner had drilled a hole to bleed pierburg valve line from intake manifold to turbos. Turbo kick was more noticeable but max boost was no more than 12psi. with normal driving car felt quicker but with WOT it was not. I changed to new pierburg valve and car reaches 16-17psi boost at WOT but feels slower than before on regular driving...
pic of this "mod"
View attachment 47523
That’s really impressive Ian, I am planning to get mine on dynamometer as well soon...