GranSport/4200 Cruise Control

spkennyuk

Member
Messages
5,930
If you get the 166 set you can do one of two things to cure / prevent the self cancel wear problem occuring.

Swap the nylon bush over from your original control arms into the 166 unit. It has 4 or 6 lugs that you can squeeze together on the back to remove it from each unit.

The other option is to remove the cruise control arm from the 166 unit and swap it over onto the original masersti unit. Its 2 or 3 screws that hold it in place just watch out for the small spring when your removing it.