davidhowson
Junior Member
- Messages
- 474
Sent from my iPhone 7+ using Tapatalk
Taken the Meta unit out of my car today to have another look at this problem. My car will unlock and unset the alarm using the remote key but will only set the alarm and not lock the doors using the remote. I can use the key in either door lock and both doors will centrally lock.
When trying to lock the car the Meta unit is silent but on unlocking, there is a definite click from the relay on the circuit board.
I'm thinking about sending this unit and a key to Abacus Alarms for them to rest.
Sent from my iPhone 7+ using Tapatalk
putting a voltage across pins 6 and 7 results in a click of the relay: across 1 and 2 there’s nothing. must be the relay.
I can find a replace part but i’m not sure my pcb soldering skills are going to be that good. any offers?
good discoveryGents, I’ve had the same problem with my aircon and door locks. Managed to get the drain cleaned out (so much water!) but too late as I can only lock the car with the key in the passenger lock. Which relay under the footwell is it that I need to replace? Thanks!
good discovery