lozcb
Member
- Messages
- 12,586
Reset Seat Memory
Adjust the seat to the disired position.
Turn on ignition but do not start the engine.
Tilt the seat forward.
With the seat still tilted forward, adjust the seat base as far forward as it will go.
Tilt the seat back.
The seat will then return to the desired position.
This reteaches the maximum movement of the seat too the memory.
This generally occurs when on eof two things has happened. 1) the seat has been left in the tilt forward position for too long, or 2) the seat was in the tilt forward position when the ignition position was changed, either turned on or off.
Seat tilt memory Reset
Open the driver's side door and QUICKLY (must all be completed within 5 seconds) click the fore/aft adjuster forward-backward-forward-backward (just click - you don't need to move the seat much at all), then release the seat back and tilt it all the way forward. The seat will then go through a calibration cycle sliding all the way forward and back twice.
regards loz
Adjust the seat to the disired position.
Turn on ignition but do not start the engine.
Tilt the seat forward.
With the seat still tilted forward, adjust the seat base as far forward as it will go.
Tilt the seat back.
The seat will then return to the desired position.
This reteaches the maximum movement of the seat too the memory.
This generally occurs when on eof two things has happened. 1) the seat has been left in the tilt forward position for too long, or 2) the seat was in the tilt forward position when the ignition position was changed, either turned on or off.
Seat tilt memory Reset
Open the driver's side door and QUICKLY (must all be completed within 5 seconds) click the fore/aft adjuster forward-backward-forward-backward (just click - you don't need to move the seat much at all), then release the seat back and tilt it all the way forward. The seat will then go through a calibration cycle sliding all the way forward and back twice.
regards loz
