Conaero's Alfa GT rebuild parts list

[conaero]

Ok guys can I ask that you all keep an eye out for me with regards to parts for my 2007 Lusso JTDm front end rebuild?

The GT is rarely in the scrap yards, but all the parts are the same as the 147 believe it or not, with the exception of the wings, bumper, grille and headlights

Parts list: (grey items have already been found)
Bonnet (GT or 147) £60
Front wings (GT only)
Headlights (GT only)
Front bumper (GT only)
Front cross member (GT or 147)
Slam panel (GT or 147) £15
Grille (GT only)
Nose badge (GT only)
Airbox
Aircon pipe
Relay box £5
Radiator
Aircon Radiator £85
Engine cover
Water pipes

Ill add more as I remember them

Thanks guys

 

[Emtee]

Ok guys can I ask that you all keep an eye out for me with regards to parts for my 2007 Lusso JTDm front end rebuild?

Parts list:

Hi Matt, I'm not seeing the parts?

Ignore that. They've just appeared.

 

[conaero]

I have just popped to the scrappy down the road and got the front crossmember, bumper supports, slam panel, all removed for £35!

Just have to check the cross member against my old one as it is a different part, very slightly, bummer

 

[Andyk]

This could be a bit of a bargain Matt..Good look...

 

[GhostyDog]

As said on the other thread Autolusso will have everything you need check out the boneyard in their website when last I was there they had about 30 engines palletted up on racking and a lot more cars than that in the boneyard

 

[conaero]

As said on the other thread Autolusso will have everything you need check out the boneyard in their website when last I was there they had about 30 engines palletted up on racking and a lot more cars than that in the boneyard

Nice one thanks, have fired off an email

 

[Parisien]

All moving along at a cracking pace Conaero...

P

PS Man-child....still not quite awake yet....will make enquiry shortly....

 

[GhostyDog]

Nice one thanks, have fired off an email

Good stuff, one of my mates works there, he's called Dan and is very knowledgable about parts seeing as he's the one that takes the cars to pieces.

Ned who owns the place even buys brand new cars to break as they are worth more in bits, mental!!!

 

[Andyk]

At this rate Matt you'll be taking around Llandow...

 

[conaero]

At this rate Matt you'll be taking around Llandow...

ha ha, yes, and probably smash it up again!

 

[Andyk]

Was thinking it...Just put some wheels and tyres on it and take it as it is then...

 

[conaero]

Good idea andy!

 

[conaero]

Here are some more pics I took, mainly showing the structural damage, or lack of it, small tweak to the front cross member and that should do it:

 

[Parisien]

Not bad at all Conaero........just as you said originally!


P

 

[Andyk]

Haven't you finished it yet Matt..come on your its been a few days get a move on

 

[conaero]

Andy, I dont even have the car yet, it comes on Tuesday, 9am, by about a quarter past, I should have most of the front end stripped.

 

[Phil747]

You want to borrow my hammer? good luck with this project be interested to see how it all goes

 

[Andyk]

Andy, I dont even have the car yet, it comes on Tuesday, 9am, by about a quarter past, I should have most of the front end stripped.

Bet you can not wait to get you hands on her Matt. You'll be busy over the coming weeks then.

 

[conaero]

Bet you can not wait to get you hands on her Matt. You'll be busy over the coming weeks then.

Yeah, the wife has had me painting door frames for about the past 6 weeks, so I could do with something to get my teeth into.

Must admit, I am hooked, might be the start of many. Locating all the parts, bit of wheeler dealering, getting them dirt cheap, love it!

 

[Andyk]

You amy have found a new calling there then Matt...