Search results

Hi, i am hopeing you maybe sble to help me, over the years ive had various throttle issues with this car, and the most recent is complete loss of throttle responce, I cannot believe the throttle body has failed again so ive fitted a contactless pedal potentiometer and still have no responce...

Hi,after 13 years of 3200 ownership i am considering a Grantorismo, what are your experiences of these and things to look out for either on the 4.2 or 4,7,cheers Dean

After 12 years of ownership,i have decided to sell my 2000 MY 3200 GTA, It is in Indianapolas red with contrasting cream interior,the vehicle will be sold with 12 months mot,and a new cam belt fitted,It comes witha comprehensive history file,it has a few marks on it as can be expected of a car...

Hi,,i know it has been discussed many times on here but i am struggling to find the thread i read a while back,i am looking to find what the output figure from the pedal potentiometer should be, 2000 my 3200,many thanks in advance

Hi,just thinking of putting the 3200 back on the road and i have no throttle responce at all.i have tried several reset procedures to no avail,the throttle body was repaired several years back but has done little work since so suspecting the throttle potentiometer,as the readings from it are...

Good evening, before its winter layup when ulocking the car and opening the door the hazards start to flash,they do go off after a period of time,but upon the next key off/on they start to flash again,its as if the alarm is activated but no noise from the siren,Any idea chaps as to the cause...

Just to see if anyone on here has used this type of spherical bearing as a lower ball joint replacement from Hill Engineering.and to gauge feedback from those who have, my only concern at the momet is durability due to ingress of dirt as there is no rubber boot,and the clamping force achieved...

hi, has anyone got the pin configuration of the throttle pedal potentiometer, I have it on my laptop somewhere but unable to acces it at the minute, Many thsnks Dean

hi. Any thoughts as to the cause of the following symptoms i am currently experiancing with my 3200gta. Under hard acceleration/ loading of the engine at 3500rpm it is as if the ignition is being cycled off and on, as the engine appears to be cutting out and coming back in, Though this does...

good evening, i am after some front upper wishbone bushes for a 3200. Have any of you forum members got any sitting on a shelf you wish to sell?

Good evening Guys,just thought it was time i reported and share with you my findings of my recent Turbo failure,The Tubo appears to have suffered from an over speed,,This i /we believe was caused by an imbalance in the wastegate actuator settings,creating an imbalance in the boost pressure and...

Good evening,has anyone any surplus exhaust manifold to turbo gaskets .these are now discontinued and i cannot find any.require 2 to get my 3200 back on hte road,

Hmmm should my turbo internals be sat in my airbox ?!!!!!!!

Good afternoon,forum,a bit of a strange request but has any member got a front lower wishbone,either a n/s or o/s of any condition,preferably with a worn ball joint as the wishbone is requiered for measurment purposes only,please feel free to PM me, Many thanks in advance Dean

Hi,and good evening,im hoping one of you members can help me,or have experianced a similar issue,today i was driving should we say spiritidly and noticed a complete lack of top end performance ,foot flat to the floor and it just wasnt pulling,i seem to remember a fellow member experiencing a...

just thought ide share this with you,and accept my oppologies if its been discussed on here before, Having experiancing a coolant leak from my radiator on my 3200.and in the line of work i am in i decided to take a closer look at the radiator in veiw of possibly re core'ing it,If you are not...

Hi,and good evening,a strange request here,but ive been forced to put the trusty old 3200 back on the road early,.but its just developed a radiator leak,Has anyone a spare radiator laying around they are willing to sell or hire out so as i can get mine repaired and or copied in alluminium,as has...

Thought i would share this with you,as i believe a few of you have experienced/experiancing a similar problem.I have had a few LED'S out on the rear tail light and brake light, enough to put a warning light on the dash,as the same LED operates both,this failure was caused by water ingress into...

Good evening,just thought i would share this information/good news with you,my 3200 had a few LED'S go out on the O/S,resulting in the annoying bulb failure light to be put on,on the dashboard, After some considerable time seperating the rear light lens from the body we at work were able to...

Hi,i know this as been posted and discussed before,but i cannot seem to find the old thread.so here goes again,i am looking to find the colour code for the wheels on a 3200,the silve colour,if anyone can supply this it would be of a great help.many thanks in advance Dean.