Search results

Sorry to hear your in the same position as I was. I took it very steady using a Dremel/drill bit and the solo attachment to get a better angle. Sent from my Pixel 6 using Tapatalk

Thanks I'll reach out. Sent from my Pixel 6 using Tapatalk

Bit of a long shot but does anyone have a spare skyhook suspension ECU for the GS I can borrow to plug and play test mine? I have the suspension warning light from changing the springs and I am sure it's the ECU. All of the shock connections are undamaged and connected correctly, no issues with...

Always have limited options on where to go in the Northeast but will need to find an alternative place! Sent from my Pixel 6 using Tapatalk

This is what I thought, I would presume the torch was nearly always needed! Sent from my Pixel 6 using Tapatalk

Agreed! Sent from my Pixel 6 using Tapatalk

Just jumping on this, I just came back from my local alignment place where they couldn't make any adjustments on the rear due to locking nuts being seized. I presume this will be the case on most of the GS and 4200 cars. Have you also been advised that the rods were seized etc, the place I go...

Correct colour applied by another supplier Sent from my Pixel 6 using Tapatalk

I second the make up wipes, just tried a pack the wife gave me on some of the buttons and came up a treat! Will tackle the rest now I know it works. Sent from my Pixel 6 using Tapatalk

I would agree if they looked like they do in the photo but when they hit certain light they have a purple/blue hue to them. Sent from my Pixel 6 using Tapatalk

I won't be unfortunately, I still have some jobs to finish on the car. Sent from my Pixel 6 using Tapatalk

No this is the first time so they were given to them with the OEM colour Sent from my Pixel 6 using Tapatalk

Could well be the case! Sent from my Pixel 6 using Tapatalk

That's the paint code they used as they got it from me based on feedback on the forum for the correct GS paint code. It's darker than the OEM colour previously. Sent from my Pixel 6 using Tapatalk

Hi everyone, I recently had the wheels for the GS refurbished and picked them up today. I got advice on the forum that the correct pain colour would be Grigio Mercury Metallic paint however when I received the wheels the colour is darker. Were there different variants of Grey for the...

Just as an update you can free the housing nut for the mount easily with a straight through socket piece. 18mm with 19mm for the spanner to attach and provides plenty of clearance. If anyone is using the QP engine mount as it's half the price of the GS one, it has already been documented that...

Thanks, what would you suggest to twist it off, used an oil filter wrench on the mount and it snapped as I cannot loosen the upper bolt. Seems to be super tight or seized! Sent from my Pixel 6 using Tapatalk

Ok so I have loosened the F1 pipes bracket from the gearbox housing, this has given me about 2 inches more clearance and I can now feel the mount nut. Problem I have is I still don't have enough room to fit the socket handle, and my stubby spanner hits the flange edges not allowing movement...

Thanks the mount I am changing as it is on the gearbox/diff at the rear of the car. Will removing the mount here cause the engine to pivot at the front? If so thanks for the heads up as I would have done this bonnet shut! Sent from my Pixel 6 using Tapatalk

Thanks, probably why I didn't see it. I'm taking the F1 system off to refresh it so should have better access. Sent from my Pixel 6 using Tapatalk