Chaps,
A/C pump not getting voltage when climate control switched on. I have the touch sensitive panel which has been replaced few years back. Fans cut in but not the pump, can anyone tell me the location of the pump relay/fuses. A relay locater diagram would be great! All the info I have...
Here's the parts manual view..............number 12 "Damper" valid for AT only! I have fitted some slotted rubber grommets into flywheel to try but noise still apparent :confused: Ah well it's Italian! But a blast to drive :p
Ok................universal Bosch LS07 (upper) & LS05 (lwr) Co2 sensors replaced on bank 2. Ended up using supplied joiner plug rather than soldering no CEL at start up need to take for decent test drive to make sure all good. Removing exhaust to get at upper sensors a real pig of a job some...
Well.........this is an interesting thread chaps. My GTA AC 70k miles has the exact "Tapping" noise emanating from the torque converter/bell housing. It's intermittent but more pronounced during warm up. I thought it may be coming from the ring gear/flywheel as there are 3 rubber dampers...
Chaps, I have sourced the 2 required sensors for Bank 2.........Bosch LS07 and LS05. Has anyone had experience with the connector plug provided with these universal kits, there doesn't appear to be anything stopping the wires from separating and open circuiting after plug assembled! It looks...
Greg, my car is one of the last 250 cars made hence requiring 2 sensors per bank. I now have the info to try and source these locally..........I recall using Repco to replace a lower sensor some time ago. Cheers
Rex, Eng No.AM585004762 build date 8/01 and many thanks for the info I'm going to try and source these sensors locally now I have the numbers for reference. Cheers
Conaero can you kindly help me out with bosch generic P/N for both upper and lower sensors as they are different size and OEM P/N. I also note that the connectors are different. Many thanks in advance.
Hi, is the LC05 Bosch sensor you're referring to the one up above the cat or the one after the cat? My UK 01 AC has 2 each exhaust and they are different size? Cheers
I have the 01 AC and going by the parts manual (See below........numbers 18&26) it describes 2 x Lambda CO2 sensors each front exhaust. The Thermocouple is located before lower C02 sensor after cat (Number 2). AC appears different can anyone assist with Bosch part numbers for both upper and...